CityBee cars are new and in good technical condition. However, if your car does not start or breaks down (if you hear a strange sound, a red indicator lights on the dashboard or there are other signs of breakdown), please contact us by phone:
CityBee Lithuania contacts: +37070077084, info@citybee.lt;
CityBee Latvia contacts: +371 27265460, info@citybee.lv ;
CityBee Estonia contacts: +372 600 0160, info@citybee.ee.
Our task is to provide the services you need as soon as possible and smoothly so that any breakdown on the road will cause the least inconvenience and you will be able to continue your trip as soon as possible. No matter where in the city you are, we will quickly make conditions to continue your trip and you will get a compensation.
Please note that electric cars can be found in Lithuania and Estonia.
Lithuania:
Make sure the car is unlocked.
Open Charger socket cover on the car which is next to the driver’s door (in the case of the VW e-Crafter electric van) or behind the rear door (in the case of light electric vehicles). If the cover does not open, click “Unlock” on the car key.
In case of charging the vehicle at the “IgnitisON” or “ElintaCharge” fast charging station:
Use the right-most charging wire (“Type 2”) that is already connected to the charging station.
Attention: Wire configurations may vary in some charging stations, so you can only find a Type 2 or “CCS” type wire.
Take the car keys and find the charging token attached (there are two tokens: one for “IgnitisON” and one for “ElintaCharge”).
Approach the charging station and scan the charging token.
Choose the charging slot (“Pasirinkite jungtį”) by pressing a button next to the shown option.
Press the button “Pradėti” to start charging.
In case of charging the vehicle at a 2-slot “ElintaCharge” station:
Take the charging wire from under the middle seat of a CityBee car:
• In the case of the VW e-Crafter electric van – under the front center seat.
• In the case of a passenger car – to the spare wheel space in the trunk.
2. Put one side of the charger wire in the car electric socket and another side into the charging station.
3. Scan the RFID token with “ElintaCharge” written on it.
4. The word “Charging” should start lightning, which means the vehicle is being charged.
Check the car’s charging socket (the green light should be lightning; if there is an orange light or no light at all, it means that the car is not being charged) and the information screen behind the steering wheel (it should indicate that the car is being charged with an indicated time left until fully charged).
Estonia:
Make sure the car is unlocked
Open the charger socket cover, which is located behind the rear door. If the cover does not open, click “Unlock” on the car key.
Charging the vehicle in ‘Eleport’ charging station:
Take the ‘Eleport’ charging card from the sun visor and tap it on the screen
Select either ‘CCS’ or ‘Type 2’ charging option and connect it to the car
Press ”start charging” to start the charging process
To make sure the car is charging, check the charging port to see, if there is a green light.
Please note that this service is provided in Lithuania and Estonia.
Lithuania:
Make sure the car is unlocked.
Take the car keys and find the charging coin (RFID key) attached (there are two coins: one for “IgnitisON” and one for “ElintaCharge”).
In case of charging at the “IgnitisON” charging station or “ElintaCharge” fast charging station:
Approach the charging station, scan the charging token, and choose “Stop Charging” (“Sustabdyti”).
Wait a few seconds until the charging process is fully stopped.
Gently unplug the cable from the vehicle and leave it at the charging station.
In case of charging the vehicle at a 2-slot “ElintaCharge” station:
Scan the charging token and wait for a few seconds until the word “Charging” on the station stops lightning.
Wait a few seconds until the charging process is fully stopped.
Gently unplug the cable from the charging station first and then unplug it from the CityBee vehicle.
Don’t leave the cable at the charging station, put the cable back in the car:
• In the case of the VW e-Crafter electric van – under the front center seat
• In the case of a passenger car – to the spare wheel space in the trunk.
If you cannot unplug the cable from the car easily, take the car keys and press the “Unlock” button twice again.
Estonia:
Make sure the car is unlocked
Take the ‘Eleport’ charging card from sun visor
To disconnect the charger in Eleport charging station:
Take the Eleport charging card and tap it on the reader
Press ”Stop Charging” (”Lõpeta laadimine”) – this process may take up to 30 seconds
Disconnect the charging cable from the car and put it back to the charger
At the moment we do not have any cars which would be 4 wheel drive.
Certainly! Every day, we not only strive to ensure that our customers’ journeys with CityBee are smooth but also work hard to offer relevant additional benefits to our customers. Very soon, we will introduce a new offer for our most active customers, and we believe that it will strengthen our friendship even more!
You can find the BeePool in the CityBee app on the main page, in the upper left corner. You just need to press the icon, which represents a group of people.
If the barrier did not open automatically, call the airport information line (+372) 605 8888. If you still had to pay for parking yourself, please keep the receipt so that we can refund you the amount paid for parking.
The price calculator gives you the opportunity to calculate the trip price before the start of the journey if you choose the “pay as you go” option.
You can calculate the price of the trip for the “pay as you go” option here:
Price calculator CityBee Lithuania
Price calculator CityBee Latvia
Price calculator CityBee Estonia